| Home > ZW3D Applications > Measurement Applications |
Measurement Applications
Applications > Measurement
Use these commands to record point data for both Romer CimCore and MicroScribe desktop coordinate measuring machines (CMMs). See Romer CimCore and MicroScribe for more information.
Record Point data
Applications > Measurement > Romer CimCore
Applications > Measurement > MicroScribe
Use these commands to reverse engineer physical objects by recording point data to a file that can be loaded into ZW3D. The command for both Romer CimCore and MicroScribe work in the same manner.
First specify a filename that will be used to save the point data. Then the following Recording Options Form appears. It has the option "Use scan mode." If you pick Yes, then points will be recorded continuously as long as the record button is being held down.
If you pick No, then only a single point is recorded every time the record button is pressed. The button layout is: button 1 and button 3 stop the recording process, button 2 records a point.
Edit Profile Settings (Romer CimCore)
Refer to the Romer CimCore documentation for these commands and menus.
Special Functions (Romer CimCore)
Refer to the Romer CimCore documentation for these commands and menus.